Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:watchguard_x750e

WatchGuard Firebox X750e Core

Hardware

  • CWT (Channel Well Technology) PSG250U-8B PSU (250W)
  • Advantech NAMB-5160X2E (REV.A1) Mainboard
  • Intel Celeron M 1300 MHz CPU
  • Intel 915GM (ICH6 Souchbridge) Chipset
  • 512MB (DDR2 533 MHz) RAM
  • 2x DDR2 Memory Bank
  • 128MB (SanDisk) CF-Card
  • 3x FAN
  • 2x IDE Connector (CN_IDE1 is regular IDE Connector, CN_IDE2 is Connecor for 2,5„ IDE HDD)
  • 2,5“ IDE HDD Port
  • PCI-E Slot
  • VGA Connector (CN_VGA1)
  • USB Header (CN_USB1, CN_USB2)
  • 2x COM Port (COM1 at Front Panel, COM2 is a Header on Mainboard CN_COM2)
  • 4x Marvel Yukon 88E8001 Gigabit LAN onboard
  • 4x Marvel LAN on PCI-E Card
  • JTAG Header (CN_JTAG1)
  • PS/2 Keyboard and Mouse Header (CN_KBMS2)
  • LCD-Display (20×2)
  • 4x Buttons at Front Panel
  • 8x LED onboard (Post-Code Debug)
  • Mini-PCI Pads

Pinout

PS-2

Connector: CN_KBMS2

Pin Name PS/2 Pin
1 CLK 5
2 GND
4 DATA 1
6 nc
7 GND 3
8 +5VDC 4

Source: stephenw10 at http://forum.pfsense.org/index.php/topic,25011.msg131307.html#msg131307

VGA

Connector: CN_VGA1

Pin Description VGA female
1 Red 1
2 n.c. n.c.
3 Green 2
4 GND? n.c.
5 Blue 3
6 n.c. n.c.
7 n.c. n.c.
8 V_SDAT 12
9 GND 5
10 Hsync 13
11 GND 6
12 Vsync 14
13 GND 7
14 V_SCLK 15
15 GND 8
16 n.c. n.c.

Source: neotec_de at http://forum.pfsense.org/index.php?topic=37405.0http://www.sechsender.com/bilder/forum/WG_pfsense_guide.pdf

Mods

WatchGuard Firebox OS 8.3

WatchGuard Firebox OS 8.3 Build 14051

Serial Console

Settings

Serial Settings: 115200-8-N-1 (Receive polarity: Idle 0)

Output

    GRUB  version 0.93  (638K lower / 515072K upper memory)

 +-------------------------------------------------------------------------+
 | WatchGuard Firebox OS 8.3/Latest Linux Kernel                           |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, 'e' to edit the
      commands before booting, or 'c' for a command-line.


   The highlighted entry will be booted automatically in 1 seconds.
  Booting 'WatchGuard Firebox OS 8.3/Latest Linux Kernel'

root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /bzImage ro root=/dev/hda6 console=ttyS0,115200 ide=nodma
   [Linux-bzImage, setup=0xc00, size=0xba8c0]
initrd /initrd
   [Linux-initrd @ 0x1f7db000, 0x148c6 bytes]

Linux version 2.4.26-wgrd (mwu@ursa.wgti.net) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #28 Fri Feb 17 16:59:03 PST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f800000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009f800 (usable)
 user: 000000000009f800 - 00000000000a0000 (reserved)
 user: 00000000000f0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000001f800000 (usable)
0MB HIGHMEM available.
504MB LOWMEM available.
On node 0 totalpages: 129024
zone(0): 4096 pages.
zone(1): 124928 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: ro root=/dev/hda6 console=ttyS0,115200 ide=nodma mem=516096K
ide_setup: ide=nodma : Prevented DMA
Initializing CPU#0
Detected 1300.071 MHz processor.
Calibrating delay loop... 2595.22 BogoMIPS
Memory: 507600k/516096k available (1105k kernel code, 8108k reserved, 240k data, 260k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(R) M processor         1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 3.00 entry at 0xf9f70, last bus=5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2641] at 00:1f.0
PCI: Found IRQ 11 for device 00:1c.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 05:00.0
PCI: Found IRQ 12 for device 00:1c.1
PCI: Sharing IRQ 12 with 02:00.0
PCI: Sharing IRQ 12 with 05:01.0
PCI: Found IRQ 5 for device 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 03:00.0
PCI: Sharing IRQ 5 with 05:02.0
PCI: Found IRQ 10 for device 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 04:00.0
PCI: Sharing IRQ 10 with 05:03.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 03:00.0
PCI: Sharing IRQ 5 with 05:02.0
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
hda: SanDisk SDCFJ-128, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 82k freed
VFS: Mounted root (ext2 filesystem).
Red Hat nash version 3.4.42 starting
Mounting /proc filesystem
Creating block devices
Creating root device
Mounting root filesystem
Freeing unused kernel memory: 260k freed
INIT: version 2.84-wg booting
Mounting proc filesystem:  [  OK  ]
Unmounting initrd:  [  OK  ]
Configuring kernel parameters:  [  OK  ]
Setting hostname localhost:  [  OK  ]
Checking root filesystem
root type is cramfs
[  OK  ]
Checking filesystems
/dev/hda1: clean, 24/512 files, 1337/4080 blocks
Checking all file systems.
[/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a /dev/hda1
[  OK  ]
tune2fs 1.32 (09-Nov-2002)
Setting maximal mount count to -1
Mounting local filesystems:  [  OK  ]
/dev/hda6                49412     49412         0 100% /
/dev/hda1                 4011      1268      2539  33% /boot
Found hda
Found hda Cf
/dev/hda4 : start=    56320, size=   194560, Id=85
TACOMA
tune2fs 1.32 (09-Nov-2002)
Setting maximal mount count to -1
Create ramdisk ram2 ram3
Setting clock  (localtime): Sun Aug 28 15:03:13 CEST 2011 [  OK  ]
cp rs_db.tar.gz to /var/tmp3
Configuring system to save crash dumps [  OK  ]
Saving crash dump data (if any) [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Setting network parameters:  [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Initializing random number generator:  [  OK  ]
Starting crond: [  OK  ]
Driver 'udm' loaded successfully
Cavium Driver --- 0.99-k
N1-Lite Device found at Bus 5 Slot 4
bar 0: d000
bar 2: d400
NO DDR on the chip
Resorting to Context memory on Host.
Finished Initializing this device
Total Number of N1/N1-Lite Devices: 1
Completion Addr d94ec000
Completion Bus Addr 194ec000
device count = 1, 1,
device ID ??, 3,
Registration is a success. The major device number is 125
To talk to the device driver, please use appropriate device node.
The minor device number corresponds to the microcode to be used.
Please read the README file for further instructions

Loaded Cavium Driver --- 0.99-k
Starting poll_thread
device count = 1
2 good cores found, device id 3
UEN = 0x3
Final Core Mask = 0x00000003
Loaded Boot microcode
Assign Cores(1315): {0 0 0 0 3 0}
Disabling units...: mask 0x3
Loading ucode 4
CAVIUM_IPSEC: Csp1ConfigDevice().
Booting ...

Continue Booting ...
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

WatchGuard Firebox X750e (OS 8.3)
firebox login:

Recovery Mode Output

Press and Hold Button „UP“ and power on Device. Display will show „Safe Mode Ready“.

Recovery Version 1.00 11/10/2005
Good Magic Number
Good Partition Type
WG File Header BC 73 F3 C3 F3 47 9C 58 C0 1A 67 F6 B5 16 D2 6E 00 7F FF E8 12 61 19 20
WG Header      73 79 73 62 2E 68 77 00 00 00 00 00 00 00 00 00 00 7F FF D4
HW Name        tc-kernel-dev
HW Version     1.0
HW Xsum        18151572
HW File Len    000BB840
Good Signature
Computed Xsum: 18151572
Kernel Xsum OK
--------------------------------
HW Name        tc-rootfs-build_222.gz
HW Version     222
HW Xsum        31739437
HW File Len    003D96E2
Good Signature
Computed Xsum: 31739437
RTFS Xsum OK
Executing sysB ...
+
WatchGuard BootLoader

Platform: PC (I386)
WGBoot> exec -r 0x1000000 -s 0x500000 -c "console=ttyS0,115200 root=/dev/ram0 ramdisk_size=128000 ide=nodma" -b 0x2000000 -l 0xD7000
RamdiskAddr=01000000, RamdiskSize=0x500000
PKHOO: s_header->version=0x203
PKHOO: base_addr=0x2000000, setup_sects=0x6, entry=0x100000
PKHOO: base_addr=0x2000e00, length=0xd6200
PKHOO: mem_size0=0x40f0000,
PKHOO2: mem_size=0x61680,
PKHOO: int15_e801 = 0x61280,
PKHOO: PARAM=0x90000
PKHOO: PARAM_CMDLINE=0x93400
PKHOO: cmd_line=console=ttyS0,115200 root=/dev/ram0 ramdisk_size=128000 ide=nodma
PKHOO: PARAM=0x90000
PKHOO: PARAM=0x90000
Linux version 2.4.26-wgrd (root@X3-130) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Nov 10 07:46:53 PST 2005
BIOS-provided physical RAM map:
 BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e801: 0000000000100000 - 00000000185a0000 (usable)
0MB HIGHMEM available.
389MB LOWMEM available.
On node 0 totalpages: 99744
zone(0): 4096 pages.
zone(1): 95648 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: console=ttyS0,115200 root=/dev/ram0 ramdisk_size=128000 ide=nodma
ide_setup: ide=nodma : Prevented DMA
Initializing CPU#0
Detected 1300.081 MHz processor.
Calibrating delay loop... 2595.22 BogoMIPS
Memory: 386868k/398976k available (1105k kernel code, 11720k reserved, 240k data, 260k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(R) M processor         1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 3.00 entry at 0xf9f70, last bus=5
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2641] at 00:1f.0
PCI: Found IRQ 11 for device 00:1c.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 05:00.0
PCI: Found IRQ 12 for device 00:1c.1
PCI: Sharing IRQ 12 with 02:00.0
PCI: Sharing IRQ 12 with 05:01.0
PCI: Found IRQ 5 for device 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 03:00.0
PCI: Sharing IRQ 5 with 05:02.0
PCI: Found IRQ 10 for device 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 04:00.0
PCI: Sharing IRQ 10 with 05:03.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 03:00.0
PCI: Sharing IRQ 5 with 05:02.0
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
hda: C/H/S=0/0/0 from BIOS ignored
hda: SanDisk SDCFJ-128, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 5120k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 260k freed
Initialization SysB.....
mke2fs 1.32 (09-Nov-2002)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram1 ext3: No journal on filesystem on ramdisk(1,1)
is mounted.
Filesystem label=
OS type: Linux
Block size=1024 frank .. pdev->devie=4362
 (log=0)
FragmePCI: Found IRQ 11 for device 01:00.0
nt size=1024 (loPCI: Sharing IRQ 11 with 00:02.0
g=0)
32000 inodPCI: Sharing IRQ 11 with 00:1c.0
es, 128000 blockPCI: Sharing IRQ 11 with 00:1d.3
s
6400 blocks (PCI: Sharing IRQ 11 with 05:00.0
5.00%) reserved  WG sk98lin - version 2.0
for the super usWG Convert eth0, to eth4
er
First data bsk98lin: Network Device Driver v8.15.1.3
lock=1
16 block(C)Copyright 1999-2005 Marvell(R).
 groups
8192 blPCI: Found IRQ 11 for device 01:00.0
ocks per group, PCI: Sharing IRQ 11 with 00:02.0
8192 fragments pPCI: Sharing IRQ 11 with 00:1c.0
er group
2000 iPCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 05:00.0

Superblock backups stored on bleth4: Marvell Yukon 88E8053 Gigabit Ethernet Controller
ocks:
        8193, 2      PrefPort:A  RlmtMode:Check Link State
4577, 40961, 573 frank .. pdev->devie=4362
45, 73729

WriPCI: Found IRQ 12 for device 02:00.0
ting inode tablePCI: Sharing IRQ 12 with 00:1c.1
s:  1/PCI: Sharing IRQ 12 with 05:01.0                                                                                WG Convert eth1, to eth5                                                                                                  4/16PCI: Found IRQ 12 for device 02:00.0                                                                            PCI: Sharing IRQ 12 with 00:1c.1                                                                                            7/PCI: Sharing IRQ 12 with 05:01.0                                                                                   1eth5: Marvell Yukon 88E8053 Gigabit Ethernet Controller                                                                  12/16      PrefPort:A  RlmtMode:Check Link State                                                                    1 frank .. pdev->devie=4362                                                                                                 15/PCI: Found IRQ 5 for device 03:00.0                                                                                done         PCI: Sharing IRQ 5 with 00:1c.2
                PCI: Sharing IRQ 5 with 00:1d.2

Writing supPCI: Sharing IRQ 5 with 00:1f.1
erblocks and filPCI: Sharing IRQ 5 with 05:02.0
esystem accountiWG Convert eth2, to eth6
ng information: PCI: Found IRQ 5 for device 03:00.0
done

This filPCI: Sharing IRQ 5 with 00:1c.2
esystem will be PCI: Sharing IRQ 5 with 00:1d.2
automatically chPCI: Sharing IRQ 5 with 00:1f.1
ecked every 26 mPCI: Sharing IRQ 5 with 05:02.0
ounts or
180 days, whichever coeth6: Marvell Yukon 88E8053 Gigabit Ethernet Controller
mes first.  Use       PrefPort:A  RlmtMode:Check Link State
tune2fs -c or -i frank .. pdev->devie=4362
 to override.
UPCI: Found IRQ 10 for device 04:00.0
sing lib/sk98linPCI: Sharing IRQ 10 with 00:1c.3
.o
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 05:03.0
WG Convert eth3, to eth7
PCI: Found IRQ 10 for device 04:00.0
PCI: Sharing IRQ 10 with 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 05:03.0
eth7: Marvell Yukon 88E8053 Gigabit Ethernet Controller
      PrefPort:A  RlmtMode:Check Link State
 frank .. pdev->devie=4320
PCI: Found IRQ 11 for device 05:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1c.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
WG Convert eth4, to eth0
PCI: Found IRQ 11 for device 05:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1c.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
      PrefPort:A  RlmtMode:Check Link State
 frank .. pdev->devie=4320
PCI: Found IRQ 12 for device 05:01.0
PCI: Sharing IRQ 12 with 00:1c.1
PCI: Sharing IRQ 12 with 02:00.0
WG Convert eth5, to eth1
PCI: Found IRQ 12 for device 05:01.0
PCI: Sharing IRQ 12 with 00:1c.1
PCI: Sharing IRQ 12 with 02:00.0
eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
      PrefPort:A  RlmtMode:Check Link State
 frank .. pdev->devie=4320
PCI: Found IRQ 5 for device 05:02.0
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 03:00.0
WG Convert eth6, to eth2
PCI: Found IRQ 5 for device 05:02.0
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 03:00.0
eth2: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
      PrefPort:A  RlmtMode:Check Link State
 frank .. pdev->devie=4320
PCI: Found IRQ 10 for device 05:03.0
PCI: Sharing IRQ 10 with 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 04:00.0
WG Convert eth7, to eth3
PCI: Found IRQ 10 for device 05:03.0
PCI: Sharing IRQ 10 with 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 04:00.0
eth3: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
      PrefPort:A  RlmtMode:Check Link State
Internet Systems Consortium DHCP Server V3.0.4b2
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Corrupt lease file - possible data loss!
Wrote 0 leases to leases file.
Listening on LPF/eth1/00:90:7f:3c:3f:ec/10.0.1/24
Sending on   LPF/eth1/00:90:7f:3c:3f:ec/10.0.1/24
Sending on   Socket/fallback/fallback-net
Starting mathopd
SysA_Version=8.3
Using /root/rsdiag/x2_5/exec/hWatchguard H/W Pkp Driver version 1.0
wx2fdrv.o
 Reg Success!! mknod pkpdev c 226 0
Pci device found !! PCI device 177d:0003 0xc19b0c00
Pci device found !! PCI device 177d:0003 bus=5 dev=4
PCI: Found IRQ 11 for device 05:04.0
Pkp bar 0: d000
Pkp bar 1: d400
Pkp Config (0x10) 0x0000d001
Pkp Config (0x18) 0x0000d401



Init Driver....



Few Dump Driver....
pDevInfo = 0xd846b560
pDevInfo = 0xd846b660
pDevInfo = 0xd846b760
pDevInfo = 0xd846b860
Can not Find PCI device, Vendor ID = 0x1148, Device ID = 0x4320
pDevInfo = 0xd846b960
pDevInfo = 0xd846ba60
pDevInfo = 0xd846bb60
pDevInfo = 0xd846bc60
Can not Find PCI device, Vendor ID = 0x1148, Device ID = 0x9e00
Can not Find PCI device, Vendor ID = 0x16ae, Device ID = 0x1141
Can not Find PCI device, Vendor ID = 0x16ae, Device ID = 0x000a
pDevInfo = 0xd846bd60
Can not Find PCI device, Vendor ID = 0x177d, Device ID = 0x0004
Can not Find PCI device, Vendor ID = 0x8086, Device ID = 0x2640
pDevInfo = 0xd846be60
Can not Find PCI device, Vendor ID = 0x8086, Device ID = 0x2651
pDevInfo = 0xd6c7f080
pDevInfo = 0xd6c7f180
pDevInfo = 0xd6c7f280
pDevInfo = 0xd6c7f380
pDevInfo = 0xd6c7f480
pDevInfo = 0xd6c7f580
pDevInfo = 0xd6c7f680
pDevInfo = 0xd6c7f780
pDevInfo = 0xd6c7f880
pDevInfo = 0xd6c7f980

Number device Found 14
VenID   DevID    BusNum   DevNum MBAR        IOBAR       IRQ
0x11ab  0x4362   0x0001   0x00   0xd0020000  0x00008001  11  0x00 macx
0x11ab  0x4362   0x0002   0x00   0xd0120000  0x00009001  12  0x00 macx
0x11ab  0x4362   0x0003   0x00   0xd0220000  0x0000a001   5  0x00 macx
0x11ab  0x4362   0x0004   0x00   0xd0320000  0x0000b001  10  0x00 macx
0x11ab  0x4320   0x0005   0x00   0xd042c000  0x0000c001  11  0x00 mac
0x11ab  0x4320   0x0005   0x01   0xd0420000  0x0000c401  12  0x00 mac
0x11ab  0x4320   0x0005   0x02   0xd0424000  0x0000c801   5  0x00 mac
0x11ab  0x4320   0x0005   0x03   0xd0428000  0x0000cc01  10  0x00 mac
0x177d  0x0003   0x0005   0x04   0x00000000  0x0000d001  11  0x00 cavium
0x8086  0x266f   0x0000   0x1f   0x00000000  0x0000f001   0  0x00 ide
0x8086  0x2658   0x0000   0x1d   0x00000000  0x0000eb01   9  0x00 uhci0
0x8086  0x2659   0x0000   0x1d   0x00000000  0x0000ed01  10  0x00 uhci1
0x8086  0x265a   0x0000   0x1d   0x00000000  0x0000e801   5  0x00 uhci2
0x8086  0x265b   0x0000   0x1d   0x00000000  0x0000e901  11  0x00 uhci3
0x8086  0x265c   0x0000   0x1d   0xd05c0000  0x00000000   9  0x00 ehci
0x8086  0x266a   0x0000   0x1f   0x00000000  0x00000501  10  0x00 smb
0x8086  0x2660   0x0000   0x1c   0x00010100  0x0001fff1  11  0x00 pcix0
0x8086  0x2662   0x0000   0x1c   0x00020200  0x0001fff1  12  0x00 pcix1
0x8086  0x2664   0x0000   0x1c   0x00030300  0x0001fff1   5  0x00 pcix2
0x8086  0x2666   0x0000   0x1c   0x00040400  0x0001fff1  10  0x00 pcix3
Device Count 20
DevName macx, Next->DevName macx
DevName macx, Next->DevName macx
DevName macx, Next->DevName macx
DevName macx, Next->DevName mac
DevName mac, Next->DevName mac
DevName mac, Next->DevName mac
DevName mac, Next->DevName mac
DevName mac, Next->DevName cavium
DevName cavium, Next->DevName ide
DevName ide, Next->DevName uhci0
  Test DrvBAR ********** Config->DrvBar : d9070000 , MemBAR=0xd0020000
  Test DrvBAR ********** Config->DrvBar : d90b1000 , MemBAR=0xd0120000
  Test DrvBAR ********** Config->DrvBar : d90f2000 , MemBAR=0xd0220000
  Test DrvBAR ********** Config->DrvBar : d9133000 , MemBAR=0xd0320000
  Test DrvBAR ********** Config->DrvBar : d9174000 , MemBAR=0xd042c000
  Test DrvBAR ********** Config->DrvBar : d91b5000 , MemBAR=0xd0420000
  Test DrvBAR ********** Config->DrvBar : d91f6000 , MemBAR=0xd0424000
  Test DrvBAR ********** Config->DrvBar : d9237000 , MemBAR=0xd0428000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : d9278000 , MemBAR=0xd05c0000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00000000
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00010100
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00020200
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00030300
  Test DrvBAR ********** Config->DrvBar : 0 , MemBAR=0x00040400
 BusNum=0x00000001, DevNum=0x00000000, Register Proc Success = macx0
 BusNum=0x00000002, DevNum=0x00000000, Register Proc Success = macx1
 BusNum=0x00000003, DevNum=0x00000000, Register Proc Success = macx2
 BusNum=0x00000004, DevNum=0x00000000, Register Proc Success = macx3
 BusNum=0x00000005, DevNum=0x00000000, Register Proc Success = mac0
 BusNum=0x00000005, DevNum=0x00000001, Register Proc Success = mac1
 BusNum=0x00000005, DevNum=0x00000002, Register Proc Success = mac2
 BusNum=0x00000005, DevNum=0x00000003, Register Proc Success = mac3
 BusNum=0x00000005, DevNum=0x00000004, Register Proc Success = cavium
 BusNum=0x00000000, DevNum=0x0000001f, Register Proc Success = ide
 BusNum=0x00000000, DevNum=0x0000001d, Register Proc Success = uhci0
 BusNum=0x00000000, DevNum=0x0000001d, Register Proc Success = uhci1
 BusNum=0x00000000, DevNum=0x0000001d, Register Proc Success = uhci2
 BusNum=0x00000000, DevNum=0x0000001d, Register Proc Success = uhci3
 BusNum=0x00000000, DevNum=0x0000001d, Register Proc Success = ehci
 BusNum=0x00000000, DevNum=0x0000001f, Register Proc Success = smb
 BusNum=0x00000000, DevNum=0x0000001c, Register Proc Success = pcix0
 BusNum=0x00000000, DevNum=0x0000001c, Register Proc Success = pcix1
 BusNum=0x00000000, DevNum=0x0000001c, Register Proc Success = pcix2
 BusNum=0x00000000, DevNum=0x0000001c, Register Proc Success = pcix3
PCI: Found IRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1c.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 05:00.0
PCI: Found IRQ 12 for device 02:00.0
PCI: Sharing IRQ 12 with 00:1c.1
PCI: Sharing IRQ 12 with 05:01.0
PCI: Found IRQ 5 for device 03:00.0
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 05:02.0
PCI: Found IRQ 10 for device 04:00.0
PCI: Sharing IRQ 10 with 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 05:03.0
PCI: Found IRQ 11 for device 05:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1c.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 12 for device 05:01.0
PCI: Sharing IRQ 12 with 00:1c.1
PCI: Sharing IRQ 12 with 02:00.0
PCI: Found IRQ 5 for device 05:02.0
PCI: Sharing IRQ 5 with 00:1c.2
PCI: Sharing IRQ 5 with 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Sharing IRQ 5 with 03:00.0
PCI: Found IRQ 10 for device 05:03.0
PCI: Sharing IRQ 10 with 00:1c.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 04:00.0
macx0 Pci device found !! bus=1 dev=0
PCI: Found IRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1c.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 05:00.0
**** ProcOpen Called ****
 mac1 detection ok...
WatchGuard e-Series
Model=Firebox X750e

Sn=9085xxxxxxxxx
Model=Firebox X750e
Fw_Version=8.3
System_id=sysb
Sysb_Version=222
Bios_Version=ETAC0017
2.4.26-wgrd
dd daemon pid 63
Safe Mode Ready
Waiting for Image...

Sn=9085xxxxxxxxx
Model=Firebox X750e
Fw_Version=8.3
System_id=sysb
Sysb_Version=222
Bios_Version=ETAC0017


Waiting Download Image....
hardware/watchguard_x750e.txt · Zuletzt geändert: 2011/08/28 01:14 von pixeldoc