Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:hdd

My HDD Stats

This Disks in one of my Server. I'll try to collect some Stats here…

WDC WD20EADS-00S2B0

HDD 1

  • Firmware: 01.00A01
  • Serial Numer: WCAVY1702XXX
  • This one failed in a NAS-Server RAID
HD Tune Pro: WDC WD20EADS-00S2B0      Health

ID                                  Current  Worst    ThresholdData     Status   
(01) Raw Read Error Rate            199      199      51       455356   ok       
(03) Spin Up Time                   144      143      21       9791     ok       
(04) Start/Stop Count               100      100      0        163      ok       
(05) Reallocated Sector Count       116      116      140      666      Failed   
(07) Seek Error Rate                200      200      0        0        ok       
(09) Power On Hours Count           53       53       0        34413    ok       
(0A) Spin Retry Count               100      100      0        0        ok       
(0B) Calibration Retry Count        100      100      0        0        ok       
(0C) Power Cycle Count              100      100      0        141      ok       
(C0) Unsafe Shutdown Count          200      200      0        87       ok       
(C1) Load Cycle Count               129      129      0        214526   ok       
(C2) Temperature                    129      96       0        23       ok       
(C4) Reallocated Event Count        1        1        0        665      warning  
(C5) Current Pending Sector         199      196      0        599      warning  
(C6) Offline Uncorrectable          199      198      0        358      ok       
(C7) Ultra DMA CRC Error Count      200      200      0        0        ok       
(C8) Write Error Rate               1        1        0        748559   ok       

Health Status         : warning

HDD 2

  • Firmware: 01.00A01
  • Serial Numer: WCAVY1742XXX
  • This one went bad in a NAS-Server RAID
HD Tune Pro: WDC WD20EADS-00S2B0      Health

ID                                  Current  Worst    ThresholdData     Status   
(01) Raw Read Error Rate            200      200      51       144      ok       
(03) Spin Up Time                   152      148      21       9400     ok       
(04) Start/Stop Count               100      100      0        164      ok       
(05) Reallocated Sector Count       184      184      140      126      warning  
(07) Seek Error Rate                200      200      0        0        ok       
(09) Power On Hours Count           63       63       0        27032    ok       
(0A) Spin Retry Count               100      100      0        0        ok       
(0B) Calibration Retry Count        100      100      0        0        ok       
(0C) Power Cycle Count              100      100      0        139      ok       
(C0) Unsafe Shutdown Count          200      200      0        81       ok       
(C1) Load Cycle Count               138      138      0        187408   ok       
(C2) Temperature                    126      100      0        26       ok       
(C4) Reallocated Event Count        100      100      0        100      warning  
(C5) Current Pending Sector         197      197      0        1139     warning  
(C6) Offline Uncorrectable          198      197      0        871      ok       
(C7) Ultra DMA CRC Error Count      200      200      0        0        ok       
(C8) Write Error Rate               1        1        0        105182   ok       

Health Status         : warning

WDC WD40EFRX-68WT0N0

WD Red (NAS) Series

HDD 2 - Power_On_Hours 0

MfG. Date: 2014-12

# smartctl -a /dev/sde
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E2XXXXXX
LU WWN Device Id: 5 0014ee 20ba1a790
Firmware Version: 82.00A82
User Capacity:    4.000.787.030.016 bytes [4,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   9
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Mar 11 01:37:21 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (55440) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x703d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   253   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       0
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0022   126   121   000    Old_age   Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
# idle3ctl /dev/sdd
Idle3 timer set to 138 (0x8a)

Firmware is untweaked.
This puppy is even more innocent yet. Lets see where this goes.

HDD 1 - Power_On_Hours 2

MfG. Date: 2014-12

# smartctl -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E3XXXXXX
LU WWN Device Id: 5 0014ee 260b37004
Firmware Version: 82.00A82
User Capacity:    4.000.787.030.016 bytes [4,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   9
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 10 22:34:29 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (52680) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x703d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   253   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       2
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0022   117   117   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
# idle3ctl /dev/sdd
Idle3 timer set to 138 (0x8a)

Firmware is untweaked.
This baby is still fresh. Lets see how she's getting along.

WDC WD40EZRX-00SPEB0

WD Green Series

Power_On_Hours 2997

# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD40EZRX-00SPEB0
Serial Number:    WD-WCC4E1902027
LU WWN Device Id: 5 0014ee 25f90d47b
Firmware Version: 80.00A80
User Capacity:    4.000.787.030.016 bytes [4,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   9
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 10 22:40:03 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (53940) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   178   178   021    Pre-fail  Always       -       8058
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       9
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       2997
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       9
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       1
193 Load_Cycle_Count        0x0032   171   171   000    Old_age   Always       -       87492
194 Temperature_Celsius     0x0022   123   109   000    Old_age   Always       -       29
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Firmware is untweaked.
Load_Cycle_Count 87492 is already somewhat high for around 124 Days runtime.

More Stats

Device Model:     WDC WD40EZRX-00SPEB0
Serial Number:    WD-WCC4E19XXXXX
  3 Spin_Up_Time            0x0027   179   178   021    Pre-fail  Always       -       8025
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3000
193 Load_Cycle_Count        0x0032   171   171   000    Old_age   Always       -       87693
idle3ctl: sg16(VSC_ENABLE) failed: Input/output error

Device Model:     ST31000340NS
Serial Number:    9QJ2Y4P8
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       12
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40533

Device Model:     KINGSTON SS100S216G
Serial Number:    16GAA00XXXXX
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4554

Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E3CXXXXX
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       5
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2
idle3ctl: Idle3 timer set to 138 (0x8a)

Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E2XXXXXX
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1
idle3ctl: Idle3 timer set to 138 (0x8a)

Device Model:     WDC WD10EADS-00L5B1
Serial Number:    WD-WCAU4C2XXXXX
  3 Spin_Up_Time            0x0027   164   162   021    Pre-fail  Always       -       6800
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   061   059   000    Old_age   Always       -       28970
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       91
idle3ctl: Idle3 timer set to 255 (0xff)

Device Model:     WDC WD20EARS-00MVWB0
Serial Number:    WD-WMAZA04XXXXX
  3 Spin_Up_Time            0x0027   160   159   021    Pre-fail  Always       -       6983
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   053   053   000    Old_age   Always       -       34513
193 Load_Cycle_Count        0x0032   102   102   000    Old_age   Always       -       295945
idle3ctl: Idle3 timer set to 255 (0xff)

Device Model:     WDC WD20EARS-00MVWB0
Serial Number:    WD-WCAZA18XXXXX
  3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       1383
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   055   055   000    Old_age   Always       -       32988
193 Load_Cycle_Count        0x0032   120   120   000    Old_age   Always       -       241944
idle3ctl: Idle3 timer set to 255 (0xff)
hardware/hdd.txt · Zuletzt geändert: 2015/03/15 23:48 von pixeldoc