Benutzer-Werkzeuge

Webseiten-Werkzeuge


android:sanein10

Sanei N10 Tablet

Sanei N10 aka. Ampe A10
Manuafactured by Ampe

Colors

  • White
  • Black
  • Aluminium (Metal Backside)

Specs

  • CPU: Allwinner A10 1.0 GHz (1.5 GHz ?)
  • RAM: 1 GB DDR3
  • WLAN: Realtek 802.11 a/b/g/n
  • Display: IPS, 10,1„, 1280×800, 16:10, HannStar 101PWW1
  • Nand: 16 GB
  • GPU: Mali-400
  • Battery: 3.7V, 7000 mAh
  • Bluetooth 2.1
  • Camera Front
  • Camera Back
  • G-sensor
  • Google Android 4.0.3

Firmware

2012-06-30

  • Build-Number: C_V3.06-crane_anpei101sy-r4.0.1039-120627
  • Android-Version: 4.0.3
  • Kernel-Version: 3.0.8+ build@emma6 #2
  • Baseband-Version: 4.0.11

2012-06-16

  • Build-Number: C_V3.06-crane_anpei101sy-r4.0.988-120612
  • Android-Version: 4.0.3
  • Kernel-Version: 3.0.8+ build@emma6 #2
  • Baseband-Version: 4.0.11

Recovery Mode

Enter Recovery Mode to upload Firmware with LiveSuit Software (included with Firmware Download).

  1. Shutdown Tablet
  2. Hold + Key
  3. Connect USB-Cable
  4. Press Power 5 - 10x times
  5. Computer will detected Tablet as USB-Device VID_1f3a_PID_efe8 if Recovery Mode is active
  6. Install USB-Driver included with LiveSuit
android/sanein10.txt · Zuletzt geändert: 2015/08/24 00:48 von pixeldoc