Benutzer-Werkzeuge

Webseiten-Werkzeuge


android:samsungs4

Samsung S4

Software

Models

  • GT-I9505
  • FIXME

Android Versions

  • 4.3
  • 4.4.2
  • 5.0.1
  • FIXME

Start "Android system recovery" Mode

Note: This Procedur is the same for most Android Devices

  1. Shutdown Phone
  2. Press and hold Volume Up + Pos1 + Power buttons
  3. Device will start in Recovery Mode

Usually for „wipe data/factory reset“ after (Custom) firmware down- or upgrade.

Start download Mode (ODIN)

Note: This Procedur is the same for most Android Devices

  1. Shutdown Phone
  2. Press and hold Volume Down + Pos1 + Power buttons
  3. Device will start in ODIN Mode

Phone get detected as „SAMSUNG Mobile USB CDC Composite Device“ (USB\VID_04E8&PID_685D) Device by Windows.

Enter USBSettings Menu

Enter *#0808# in Phone App to enter the USB Settings.

Available Settings

  • USB
    • CP
    • AP (Default)
  • USB Settings
    • MTP (Default)
    • MTP + ADB
    • PTP
    • PTP + ADB
    • RNDIS + DM + MODEM
    • RMNET + DM + MODEM
    • DM + MODEM+ ADB

Enable Developer Mode

Android 4.3: Settings → More → About Device → Quickly tap multiple Times (10x) on Build Number until you see a messeage that Developer mode is enabled.

Show IMEI

Enter *#06# in Phone App to show the IMEI Number from the Phone.

Troubleshoot

No USB Connection with PC

If the Phone is only loading the battery if connected to PC the USB Cable is not compatible with the S4. Try the original Samsung Micro USB Cable

android/samsungs4.txt · Zuletzt geändert: 2015/08/24 00:47 von pixeldoc